Skip to content

 Our Showroom will be CLOSED early 11/25 and ALL DAY 11/26 for Thanksgiving!

New customers 10% off with WELCOME10.

Flat rate shipping on all indoor furniture

20% OFF Bedroom, Dining, and Bookcases!

It's Black Friday ALL MONTH LONG!

Choosing Your Wood

Furniture wood types get described with adjectives and priced without explanation. The same dining chair can swing nearly $150 between the cheapest species and the dearest, and the reason sits in the timber rather than the design. This page ranks the seven species we build in on grain, hardness, price and how each one takes a stain.

american made amish Williamson Farmhouse Bedroom Collection

Which Woods Do We Build In?

Seven species cover almost the entire catalog. Oak, brown maple, cherry and quartersawn white oak are offered on nearly everything, while sap cherry, hickory and hard maple appear on a narrower set of designs.

Availability matters more than people expect, because it decides whether the bed and the nightstands can be ordered in the same timber. The last column below is the share of our 1,827 made-to-order pieces that offer each species.
Guide table
Species What it looks like Offered on
Brown maple Tight, even grain with very little figure. Takes color more uniformly than anything else here 98% of the range
Oak Open grain with a pronounced, repeating pattern that reads from across a room 95%
Cherry Fine grain, warm undertone, and it deepens as it ages 90%
Quartersawn white oak Cut across the rays so the fleck shows as pale ribbons through the grain 87%
Sap cherry Cherry with the pale sapwood left in, so the board carries two tones 60%
Hickory The loudest grain we sell, swinging between near-white and deep brown in one board 55%
Hard maple Dense, pale and almost featureless, which is the point of it 25%

Walnut sits outside that list at 9% and is worth asking about rather than browsing for. Everything here is solid North American hardwood, cut and assembled after your order.

Where Does the Wood Decision Matter Most?

In three places, and for three different reasons. A dining room shows the grain under the most light and the most use, a bedroom asks four or five pieces to agree with each other, and the samples collection is where both of those get settled before anything is built.

Start with the samples whichever room you are furnishing. Ten minutes with two chips saves a decision you cannot revisit once the timber is cut.

Two Chips Settle It Faster Than Two Weeks of Reading

Everything below describes what each species does. A pair of samples on your own table shows you, which is a different thing entirely and takes an afternoon.

Annabelle Dining Collection

What Does Each Species Cost?

Oak is the least expensive on almost every piece and quartersawn white oak the most, with a spread of roughly 25% to 40% between them on the same design. Brown maple sits a little above oak, cherry and hickory land in the middle, and the rustic cut of quartersawn oak slots just under the plain one.

The ladder holds whatever you are buying, which makes it easy to budget before you have chosen a piece. Below is the same chair, the same bed and the same bookcase, priced across every species each one offers.
Guide table
Piece Species Price
Mission Dining Chair (side chair, wood seat) Oak $371
Mission Dining Chair (side chair, wood seat) Brown maple $387
Mission Dining Chair (side chair, wood seat) Sap cherry $461
Mission Dining Chair (side chair, wood seat) Cherry $477
Mission Dining Chair (side chair, wood seat) Hickory $477
Mission Dining Chair (side chair, wood seat) Rustic quartersawn white oak $504
Mission Dining Chair (side chair, wood seat) Quartersawn white oak $517
Arlington Panel Bed (queen) Oak $2,598
Arlington Panel Bed (queen) Brown maple $2,598
Arlington Panel Bed (queen) Sap cherry $2,598
Arlington Panel Bed (queen) Cherry $3,245
Arlington Panel Bed (queen) Hard maple $3,245
Arlington Panel Bed (queen) Quartersawn white oak $3,245
Arlington Panel Bed (queen) Rustic quartersawn white oak Not offered in queen ($3,008 in king)
Artesa Five Shelves Bookcase Oak $1,903
Artesa Five Shelves Bookcase Brown maple $1,985
Artesa Five Shelves Bookcase Sap cherry $2,125
Artesa Five Shelves Bookcase Rustic hickory $2,125
Artesa Five Shelves Bookcase Rustic quartersawn white oak $2,125
Artesa Five Shelves Bookcase Cherry $2,467
Artesa Five Shelves Bookcase Quartersawn white oak $2,467

Why Oak Sits at the Bottom

Oak grows widely across the eastern United States, mills predictably and arrives at a workshop in consistent widths. Abundance and predictability both show up in the price.

None of that makes it a lesser wood. Oak is hard, it wears extremely well, and its grain is the reason a great deal of American furniture looks the way it does.

The limit is the grain itself. It is assertive, it repeats, and on a large flat surface some people find it busy rather than beautiful.

Why Quartersawn Oak Sits at the Top

Quartersawing cuts the log radially instead of straight through, which exposes the medullary rays as pale flecks running across the board.

That cut yields far fewer usable boards from the same tree, and the waste is the cost. What you buy is a figure no other species produces and a board that moves less with the seasons than plain sawn stock.

The limit is budget and taste. It is the most expensive choice on nearly every piece, and the fleck is distinctive enough that you either want it or you do not.

What the Difference Buys You on a Full Set

On one chair, that gap is modest. Multiply it by six and it becomes a bench, or most of a buffet.

Work the species decision out across everything you intend to order rather than on the first piece. The spread compounds, and it compounds hardest on dining rooms, where you buy the same item six times.

The limit is false economy. Dropping to a species you do not like to save the price of a bench gets you a dining room you look at every day and never quite settle on.

Which Four Woods Do Most People Choose?

Oak, brown maple, cherry and quartersawn white oak account for the overwhelming majority of what the shops build for us. Each is offered on at least 87% of the range, which means any of the four can carry a whole room without a piece dropping out of the set.

They sort cleanly by how much the wood says for itself, from the quietest to the most emphatic.
Natural-Brown Maple

Brown Maple

The calmest of the four, with a close grain and almost no figure to compete with a stain.

It is the species to choose when the color is the point and the timber should stay out of the way. Because it absorbs stain so evenly, it is also the most reliable way to land close to a specific shade, which is why painted and dark-stained pieces are so often built from it.

The limit is character. If you want the wood to be interesting in its own right, brown maple is the wrong end of this list.
Natural-Cherry

Cherry

Fine-grained, warm-toned, and the only species here that keeps changing after it reaches you.

Cherry darkens and reddens with exposure, so a piece looks noticeably richer at five years than on delivery day. It is the traditional choice for formal dining rooms and the one most likely to be described as mellowing rather than aging.

The limit is patience and matching. A cherry piece added years later starts pale next to one that has already darkened, so buy cherry pieces together where you can.
Natural-Oak

Oak

The most recognizable grain in American furniture, open-pored and strongly patterned.

It holds up to heavy daily use, and the grain hides minor wear in a way smoother species do not. On farmhouse and traditional designs, it is the wood the style was drawn around.

The limit is scale. A strong repeating pattern across a six foot tabletop is a lot of visual activity, so look at a sample next to something large rather than judging it on a chair.
Natural-Quartersawn White Oak

Quartersawn White Oak

The signature wood of Mission furniture, and the reason that style looks the way it does.

The radial cut reveals ray fleck as pale ribbons lying across the grain, which no other species in the catalog produces. It is also the most dimensionally stable of the four, moving less across the seasons than plain sawn boards.

The limit is cost. It carries the highest price on nearly every piece we offer it on, and the fleck is a strong look that not every room wants.

Tell Us the Pieces, We Will Tell You the Species

Send the list of what you are furnishing. We will reply with the species every piece on it can actually be built in, and what each one does to your total.

Which Woods Are Worth Asking For?

Four species sit outside the everyday four, on a narrower slice of the catalog, and each exists for a specific reason rather than as a variation on the others. Hickory, hard maple, sap cherry and walnut.

Ask before you fall for a piece in one of these. Availability is the constraint, not willingness, and we will tell you in a sentence whether your design offers it.
Natural-Hickory

Hickory

The hardest wood we work with and comfortably the most dramatic.

A single hickory board can run from near-white sapwood to deep chocolate heartwood, which makes a tabletop a composition rather than a surface. It is also exceptionally tough, so it suits furniture that takes punishment.

The limit is consistency. Hickory does not blend quietly into a room, and two pieces in it will never look like siblings the way two brown maple pieces will.
Natural-Hard Maple

Hard Maple

Dense, pale and close to featureless, which is the whole point of specifying it.

It is the brightest timber in the catalog, and the one that stops a small room closing in. The surface is hard enough to shrug off the kind of daily contact that marks softer species.

The limit is availability and stain. It appears on roughly a quarter of the range, and its density means it accepts dark stains less evenly than brown maple does.
Natural-Sap Cherry

Sap Cherry

Cherry with the pale sapwood left in rather than cut away, so each board carries both tones.

It costs less than clear cherry because it uses more of the tree, and the two-tone effect is deliberate rather than a defect. Over time the darker portions deepen while the sap stays light, which increases the contrast.

The limit is predictability. No two sap cherry boards are alike, so this is a species to order samples for rather than to picture from a description.
Natural-Walnut

Walnut

The only naturally dark wood here, with a deep chocolate tone that needs no stain to get there.

It is the most striking timber we offer and the one that makes a single piece the focus of a room. Figure varies widely from board to board, which collectors regard as the attraction.

The limit is supply. Walnut appears on around 9% of the range, so check availability before planning anything around it.
Amish Houston Trestle Table

What Are the Rustic and Rough Sawn Grades?

Rustic is a grade rather than a species. The same tree yields clear boards and character boards, and a rustic grade is the second kind, kept and used instead of being cut out.

That is worth understanding before you dismiss it, because people often read rustic as lower quality when it describes appearance rather than strength. Four grades appear across our range.
amish siesta mission nightstand

Rustic Quartersawn White Oak

Quartersawn oak with knots, mineral streaks and color variation left in the board.

It carries the same ray fleck as the clear grade and costs slightly less, which makes it the value choice for anyone who wants Mission character without the premium. On Arlington beds it sits in the lower price tier while clear quartersawn sits in the upper one.

The limit is uniformity. Knots land where the tree put them, so each piece is genuinely individual and cannot be previewed exactly.

Rustic Hickory

Hickory already has enormous tonal range, and the rustic grade adds knots and checks on top of it.

This is the most characterful surface in the entire catalog. On a farmhouse table it looks like what people picture when they imagine reclaimed timber, while still being new stock cut for the purpose.

The limit is that it dominates. One rustic hickory piece sets the tone for a whole room, and a second one competing with it rarely works.
Hudson Hutch

Rustic Cherry

Cherry with pin knots and gum pockets retained, at a lower price than the clear grade.

It still darkens with age like any cherry, so the character marks deepen alongside the rest of the board. It suits a traditional room where you want warmth without formality.

The limit is availability. Rustic cherry appears on roughly 16% of the range, so it is a species to ask about rather than filter for.
Amish Houston Trestle Table

Rough Sawn

Rough sawn is a surface treatment rather than a grade, leaving the saw marks from milling visible under the finish.

It gives a tabletop texture you can feel, and it hides wear better than any smooth surface because the top was never smooth to begin with. Brown maple is the species it appears on most often.

The limit is cleaning and writing. A textured surface traps more than a flat one, and you will want something under the paper.

Which Wood Fits Your Priority?

Most people come to this decision with a single priority that outranks everything else. Six shortcuts, each pointing at the species that answers it.

If two of these apply to you, follow the one you would be unhappiest to compromise on.
Toughest Surface

Toughest Surface

Hickory, then hard maple and oak. For tables and desks that take real daily punishment.
Lowest Price

Lowest Price

Oak on nearly every piece, with brown maple a close second.
Most Stain Choice

Most Stain Choice

Oak at 60 colors, brown maple at 50, quartersawn white oak and hard maple at 48 each.
Most Figure

Most Figure

Hickory for tonal range, quartersawn white oak for ray fleck, walnut for depth.
Most Traditional

Most Traditional

Quartersawn white oak, which is the wood Mission furniture was built around.
Rustic Frontier Arm Chair-Dining-The Amish House

How Does Stain Behave on Each Wood?

Differently enough that a stain name means nothing on its own. The same color laid on oak and on brown maple produces two results, because an open-pored wood pulls pigment into the grain while a close-grained one holds it on the surface.

Our sample range runs to 438 chips, and the number of colors offered varies by species because not every wood accepts every finish convincingly.
Shaker Sideboard-The Amish House

How Many Colors Each Wood Takes

Oak leads at 60, brown maple follows at 50, and quartersawn white oak, hard maple and rough sawn brown maple each offer 48. Hickory takes 46 and cherry 38.

At the narrower end, plain sawn white oak offers 22, walnut 19 and sap cherry 17. Those are not arbitrary. A wood with strong natural color of its own has fewer finishes that improve on it.

The limit is that more choice is not better choice. Walnut's nineteen are nineteen that suit walnut, which is more useful than sixty that mostly fight it.
Amish Desert Mountain Leg Table - Quick Ship

Going Light or Going Dark

Light finishes expose everything the timber is doing, which flatters figured woods and leaves a plain one looking plain.

Dark finishes do the reverse, compressing the difference between species until an oak and a maple start to resemble each other. If you are set on a dark piece, the money you would spend moving up the species ladder largely disappears into the color.

The limit is that dark does not hide an open grain. Oak stained near-black still reads as oak from two feet away, because the pore pattern survives any pigment you put over it.
Amish Theodore Chair

Matching Something You Already Own

Hold the chip against the piece itself instead of working from a photograph, and judge them together in the room's own light at the hour you are usually standing in it.

Bring the species into the conversation too. Matching a cherry sideboard is far easier in cherry than in oak, whatever stain you reach for, because the grain underneath will not cooperate.

The limit is age. An older piece has darkened, and a new board in the same species and stain starts where that one started rather than where it is now.
ORDER STAIN SAMPLES

The Same Timber, Fitted

Everything on this page applies to cabinetry as much as furniture, and our sister company works from the same hardwoods. If a kitchen is part of the project, specifying both from one species is far easier than matching them afterward.

Homestead Corner Desk & Hutch

Can You Build in a Wood You Do Not List?

Usually, yes. Beyond the standard range we work in hickory, elm, hard maple and walnut, along with other hardwoods that never appear in the dropdown. Asking costs nothing.

What you should not do is assume. Species availability is set by the workshop building that design, so the answer is specific to the piece rather than general to us.

The Terms

Guide table
Standard species Brown maple, cherry, oak and quartersawn white oak, with their rustic and sap variations
Also available on request Hickory, elm, hard maple, walnut and other hardwoods
Cost of choosing Nothing extra for the choice itself. Species carries its own price, as set out above
Custom sizes Quoted within 24 hours of you sending the dimensions
Changing your mind Wood or stain can be changed free within ten days of ordering
Materials Solid North American hardwood throughout, with no particleboard and no veneer

Order chips for any species you are seriously weighing, including ones outside the list. Getting it wrong is a ten day problem if you catch it and a thirty year one if you do not.

Pick the Species, Then the Color

List everything you intend to order, check which species all of it is offered in, and narrow from there. Settle how much you want the wood to say for itself, let the price ladder decide between the two you are left with, and leave the stain until the chips are in front of you.

If you would rather not guess, call us at 615-819-2772, list the pieces, and we will say which species can carry the whole set.

You can also compare the full range of woods and stains at your own pace, or put your hands on the boards at our showroom on Nolensville Road. We are open Tuesday through Saturday, 10 am to 5 pm.

Frequently Asked Questions

Hickory, by a clear margin, with hard maple and oak behind it. All three handle daily use comfortably. Oak has the advantage that its open grain disguises small marks, which is worth as much in practice as raw hardness.
The cut. Quartersawing takes the log radially rather than straight through, which yields fewer usable boards from the same tree. You are paying for the waste, and what you get is the ray fleck and a board that moves less with the seasons.
Sap cherry keeps the pale sapwood that clear cherry cuts away, so each board shows two tones. It costs less because it uses more of the tree, and the contrast grows over time as the darker areas deepen and the sap stays light.
No. Rustic describes appearance rather than strength, and a rustic board is structurally the same timber with knots, streaks and color variation left in. It usually costs less because less of the tree is discarded.
Close, not identical. Wood is a growing material and boards vary within a species, which is more noticeable in hickory and sap cherry than in brown maple. Ordering pieces together gives the best result.
Brown maple. Its tight, even grain accepts stain more uniformly than anything else we build in, which is why it carries most of our painted and dark-stained work.
Yes, and it often works better than a forced match. Keep one species for the large pieces and let a single smaller item differ deliberately, since a near-match across two species looks like a failed attempt, where an obvious difference looks intentional.
Not usually. What varies is whether a particular design is offered in the species at all, which depends on the workshop building it. Name the piece and we will check it for you ahead of any order.